- Uncategorized
Plastic Wall Switches
- Plastic Wall Switch – 4 Buttons
- Plastic Wall Switch – 2 Buttons
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Plastic Wall Switches
Products
GRMS » Wired GRMS Range » Plastic Wall Switches »
Plastic Room Thermo Regulator
Product Number: PRTR
- IDRT3-1 is a digital wall temperature controller used to regulate the temperature in a room.
- Using the IDRT3-1, it is possible to correct the given heating/cooling circuit within a range of ±3, ±4 or ±5 °C (optional in SW iDM3).
- The temperature controller is equipped with an integrated heat sensor used to measure the room temperature. It is also equipped with two analog digital inputs (AIN/DIN), which can be used to connect two potential free contacts or a single external temperature sensor TC/TZ (e.g. for measuring the floor temperature).
- The display shows the current temperature and after pressing one of two buttons under the display, you can control the desired temperature.
- Readability improves after pressing one of the buttons to activate the backlight.
Order Inquiry
Description
- IDRT3-1 is a digital wall temperature controller used to regulate the temperature in a room.
- Using the IDRT3-1, it is possible to correct the given heating/cooling circuit within a range of ±3, ±4 or ±5 °C (optional in SW iDM3).
- The temperature controller is equipped with an integrated heat sensor used to measure the room temperature. It is also equipped with two analog digital inputs (AIN/DIN), which can be used to connect two potential free contacts or a single external temperature sensor TC/TZ (e.g. for measuring the floor temperature).
- The display shows the current temperature and after pressing one of two buttons under the display, you can control the desired temperature.
- Readability improves after pressing one of the buttons to activate the backlight.
- Heating/cooling circuit is assigned with a thermo-regulator using iDM3.
- In the case of temperature correction within ±3, ±4 or ± 5 °C, this change is valid until the next time mark within the time schedule established in iDM3.
- IDRT3 -1 in design LOGUS90 is intended for mounting into an installation box..
Specification
- Number of buttons: 2 (for temperature correction)
- Supply voltage: BUS 27 V DC
- Rated current from BUS: 20 mA (at 27 V DC)
- Internal temp. sensor: Yes
- Inputs: 2x temperature or 2x digital
- Dimensions plastic: 85.6 x 85.6 x 42 mm
- Dimensions other materials: 94 x 94 x 50 mm
Related products
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
