- Uncategorized
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Sensors
Products
GRMS » Wired GRMS Range » Sensors »
Room Controller – Phase Dimmer
Product Number: RM-CNTR-PHDM
- The RC3-612M is an I/O actuator equipped with 6 binary inputs, of which 2 can be configured as temperature inputs and 8 independent relays with switching potential-free and potential-free contacts. It also includes two analog outputs 0(1)-10V with a load capacity of up to 10mA and two-phase dimmer channels.
- Binary inputs RC3-612M are used for connecting up to 6 devices with potential-free Contact (as are levers switches buttons Other Designs detectors EZS and EPS a other).
- Temperature inputs support the connection of TC/TZ temperature sensors in a 2-wire connection for temperature sensing needs.
- The actuator is designed for switching up to eight diff erent appliances and loads by relay output (potential-free contact).
Order Inquiry
Description
- The RC3-612M is an I/O actuator equipped with 6 binary inputs, of which 2 can be configured as temperature inputs and 8 independent relays with switching potential-free and potential-free contacts. It also includes two analog outputs 0(1)-10V with a load capacity of up to 10mA and two-phase dimmer channels.
- Binary inputs RC3-612M are used for connecting up to 6 devices with potential-free Contact (as are levers switches buttons Other Designs detectors EZS and EPS a other).
- Temperature inputs support the connection of TC/TZ temperature sensors in a 2-wire connection for temperature sensing needs.
- The actuator is designed for switching up to eight different appliances and loads by relay output (potential-free contact).
- The maximum load capacity of the relay contacts is 10 A/2500 VA/AC1. Each of the output contacts is individually controllable. Relays are divided into four pairs, where each pair switches on its common potential.
- The two-channel phase dimmer allows dimming of resistive, capacitive and inductive loads up to 150VA per channel. The nature of the load is set in the output parameters when configuring the unit.
- Analog outputs are considered for use with thermoregulation heads, air-conditioning ventilation flaps, various other dimmers or other devices with an analog control voltage of 0-10V or 1-10V.
- The parameters of all configurable inputs and outputs are set in the DynamicPro Designer & Manager configuration software environment, which is designed for Windows 7, 8 and 10 operating systems.
- RC3-612M in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.
