A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
They can be combined with detectors, controllers, DynamicPro RF Control, or system components…
The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
It allows the connection of switched loads with a total sum of 8 A (2,000 W).
Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s
A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
They can be combined with detectors, controllers, DynamicPro RF Control, or system components…
The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
It allows the connection of switched loads with a total sum of 8 A (2,000 W).
Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s-60min. It is possible to assign any function to each output relay.
The external button is programmed as a wireless button.
Each output can be controlled by up to 12/12 channels (1 channel represents 1 button on the controller).
The programming button on the unit is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
For components labeled as DynamicPro RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
Communication frequency with bidirectional protocol DynamicPro RF Control (RFIO2).
Specification
Output: 2x switching, 8 A
Supply voltage (frequency): AC 230 V (50-60 Hz)
Design: BOX
Dimensions: 43 x 44 x 22 mm
Protocol: RFIO2
Downloads
Contact Us
Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
LEADING INNOVATION IN LIFE SAFETY
DynamicPro is a Canadian company specializing in providing integrated
technologies in life safety and advanced building management solutions.
Our Address
-CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates