Switching element with one / two output relays used to control appliances and lights. 1 / 2 existing pushbuttons can be connected to the internal terminals in wiring.
It can be combined with Detectors, Controllers, or System Elements DynamicPro RF Control.
The BOX version offers installation directly into the installation box, ceiling, or housing of the controlled appliance. Easy installation thanks to screwless terminals and zero and phase connections
Allows connection of switching loads with a total of 8 A (2,000 W).
Functions: push-button, impulse relay and delayed start-up or return time functions with 2 s-60 min time setting. Any function can be assigned to each output relay. For the RFSAI-11B-SL, the ON/OFF function can be assigned to any relay.
Switching element with one / two output relays used to control appliances and lights. 1 / 2 existing pushbuttons can be connected to the internal terminals in wiring.
It can be combined with Detectors, Controllers, or System Elements DynamicPro RF Control.
The BOX version offers installation directly into the installation box, ceiling, or housing of the controlled appliance. Easy installation thanks to screwless terminals and zero and phase connections
Allows connection of switching loads with a total of 8 A (2,000 W).
Functions: push-button, impulse relay and delayed start-up or return time functions with 2 s-60 min time setting. Any function can be assigned to each output relay. For the RFSAI-11B-SL, the ON/OFF function can be assigned to any relay.
The external pushbutton is assigned in the same way as the wireless pushbutton.
Each output can be controlled by up to 12/12 channels (1 channel represents one button on the controller). For RFSAI-61B-SL and RFSAI-11B-SL up to 25 channels.
The programming button on the element also serves as a manual output control.
Memory status can be set in case of power failure.
The repeater function of the elements can be set via the RFAF/USB service device.
Range up to 200 m (in open area), in case of insufficient signal between the controller and the element use the signal repeater RFRP-20 or elements with RFIO2 protocol that support this function.
Communication with DynamicPro RF Control2 bidirectional protocol (RFIO2)
Specification
Output: 2x switching, 8 A
Supply voltage (frequency): AC 230 V (50-60 Hz)
Design: BOX
Dimensions: 43 x 44 x 22 mm
Protocol: RFIO2
Downloads
Contact Us
Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
LEADING INNOVATION IN LIFE SAFETY
DynamicPro is a Canadian company specializing in providing integrated
technologies in life safety and advanced building management solutions.
Our Address
-CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates