• Corporate & Retails

    Master Panel

  • Hotel & Residential

    Master Panel

  • Education & Culture

    Master Panel

  • Goverments & Institutions

    Master Panel

  • Sports & Entertainment

    Master Panel

  • Transportation

    Master Panel

  • House of Worship

    Master Panel

  • Emergency Lighting

    Master Panel

  • GRMS

    Master Panel

  • Monitoring Master Panel

    Master Panel

  • Emergency Exit Signs - Ni-MH Battery

    Master Panel

  • Emergency Exit Signs - LiFePO4 Battery

    Master Panel

  • LED Self-Contained Emergency Lights

    Master Panel

  • Wired GRMS Range

    Master Panel

  • Wireless GRMS Range

    Master Panel

  • Master Panel

    Master Panel

  • 9100-Series

    Master Panel

  • 9400-Series

    Master Panel

  • Controllers

    Master Panel

  • Wall Glass Button Panels

    Master Panel

  • Plastic Wall Switches

    Master Panel

  • Dimmers

    Master Panel

  • Wall Glass Switches

    Master Panel

  • Sensors

    Master Panel

  • Converters

    Master Panel

  • Glass Bedside Panels

    Master Panel

  • Multi-Function Room Controllers

    Master Panel

  • Actuators

    Master Panel

  • Glass Card Readers & Holders

    Master Panel

  • Glass Thermo Regulators

    Master Panel

  • Switches

    Master Panel

  • Sensors - Wireless

    Master Panel

  • Access Control

    Master Panel

  • HVAC Control

    Master Panel

  • Dimmers -Wireless

    Master Panel

  • Actuators - Wireless

    Master Panel

  • 8200-Series

    Master Panel

  • 8300-Series

    Master Panel



    • Products

    Emergency Lighting » Monitoring Master Panel » Master Panel »

    WL Card Reader

    Product Number: WL-CR-G-B / WL-CR-G-W


    • Multifunctional RFID card reader RFGCR-31 is part of a comprehensive range of glass control units and can be advantageously used in all projects, e.g. guest room management system.
    • The reader sends a wireless command to switch, signaling, bell, etc. This makes it suitable for reconstruction, where the main benefi t is the installation speed.
    • RFGCR-31 card reader is designed for reading smart cards, which are intended to enter the hotel room or any other part of the building.
    • RFGCR-31 supports RFID media with a carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1).

    Order Inquiry


    Description

    • Multifunctional RFID card reader RFGCR-31 is part of a comprehensive range of glass control units and can be advantageously used in all projects, e.g. guest room management system.
    • The reader sends a wireless command to switch, signaling, bell, etc. This makes it suitable for reconstruction, where the main benefi t is the installation speed.
    • RFGCR-31 card reader is designed for reading smart cards, which are intended to enter the hotel room or any other part of the building.
    • RFGCR-31 supports RFID media with a carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1).
    • The RFGCR-31 is a design component of the system and is available in elegant black (RFGCR-31/B) and white (RFGCR-31/W) variants.
    • Input card reader is the first device of guest room management system, with which the hotel guest comes into contact first and therefore was designed with an emphasis on representative design. • Printing is possible to customize to the investor requirements. The room number as well as the logo of the hotel can be also printed on each component.
    • The controller is also equipped with touch button with function of bell and with two icons to indicate the status of guest requests, e.g. “Do Not Disturb” and “Make Up Room”.
    • Individual symbols can be illuminated in one of seven colours – red, green, blue, yellow, pink, turquoise and white.
    • Reader RFGCR-31 is equipped with an 8 A relay output with AgSnO2 contact for door lock control.
    • Reader RFGCR-31 is equipped with a sensor for ambient light intensity. Based on information from the sensor it can e.g. switch the lighting circuits in the corridor.
    • Range up to 160 m (in open space), if the signal is insuffi cient between the card reader and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
    • Communication frequency with bidirectional protocol RFIO.
    • All versions are in the size of the module (94×94 mm) from the line of luxury switches and sockets LOGUS90 and are therefore fully in line with the design of frames for the sockets of this series, where you can just as for the controllers choose white and black glass frames.
    • RFGCR-31 are designed for mounting into an installation box.

    Specification

    • Supply voltage: 110 – 230 V AC / 50 – 60 Hz
    • Dissipated power: max. 2.5 W
    • Illuminance sensor: 1 to 100 000 Lx
    • Number of control buttons: 3
    • Indication: Coloured illuminated symbol
    • Signalling: Do Not Disturb, Make Up Room
    • Output: 1x changeover 8 A / AgSnO2
    • Frequency: 866–922 MHz
    • Protection degree: IP20
    • Installation: into installation box
    • Dimensions: 94 x 94 x 36 mm
    • Weight: 161

    Downloads

    Contact Us

    • Address:
      CANADA      : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
      UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
    • Email us:
      info@dynamicpro.ca 
      info@ateis.ae
    • Call:
      Canada Office: +1 (204) 306 5173
      UAE Office: +971 (4) 3262730

     

    LEADING INNOVATION
    IN LIFE SAFETY
    DynamicPro is a Canadian company specializing in providing integrated
    technologies in life safety and advanced building management solutions.



    Our Address

    -CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

    Sun-Thurs: 8:30am - 6:30pm

    info@dynamicpro.ca / info@ateis.ae

    +1 (204) 306 5173 / +971 (4) 3262730

    Copyright 2022 © Dynamicpro