• Corporate & Retails

    8200-Series

  • Hotel & Residential

    8200-Series

  • Education & Culture

    8200-Series

  • Goverments & Institutions

    8200-Series

  • Sports & Entertainment

    8200-Series

  • Transportation

    8200-Series

  • House of Worship

    8200-Series

  • Emergency Lighting

    8200-Series

  • GRMS

    8200-Series

  • Monitoring Master Panel

    8200-Series

  • Emergency Exit Signs - Ni-MH Battery

    8200-Series

  • Emergency Exit Signs - LiFePO4 Battery

    8200-Series

  • LED Self-Contained Emergency Lights

    8200-Series

  • Wired GRMS Range

    8200-Series

  • Wireless GRMS Range

    8200-Series

  • Master Panel

    8200-Series

  • 9100-Series

    8200-Series

  • 9400-Series

    8200-Series

  • Controllers

    8200-Series

  • Wall Glass Button Panels

    8200-Series

  • Plastic Wall Switches

    8200-Series

  • Dimmers

    8200-Series

  • Wall Glass Switches

    8200-Series

  • Sensors

    8200-Series

  • Converters

    8200-Series

  • Glass Bedside Panels

    8200-Series

  • Multi-Function Room Controllers

    8200-Series

  • Actuators

    8200-Series

  • Glass Card Readers & Holders

    8200-Series

  • Glass Thermo Regulators

    8200-Series

  • Switches

    8200-Series

  • Sensors - Wireless

    8200-Series

  • Access Control

    8200-Series

  • HVAC Control

    8200-Series

  • Dimmers -Wireless

    8200-Series

  • Actuators - Wireless

    8200-Series

  • 8200-Series

    8200-Series

  • 8300-Series

    8200-Series



    • Products

    Emergency Lighting » LED Self-Contained Emergency Lights » 8200-Series »

    WL Card Reader

    Product Number: WL-CR-G-B / WL-CR-G-W


    • Multifunctional RFID card reader RFGCR-31 is part of a comprehensive range of glass control units and can be advantageously used in all projects, e.g. guest room management system.
    • The reader sends a wireless command to switch, signaling, bell, etc. This makes it suitable for reconstruction, where the main benefi t is the installation speed.
    • RFGCR-31 card reader is designed for reading smart cards, which are intended to enter the hotel room or any other part of the building.
    • RFGCR-31 supports RFID media with a carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1).

    Order Inquiry


    Description

    • Multifunctional RFID card reader RFGCR-31 is part of a comprehensive range of glass control units and can be advantageously used in all projects, e.g. guest room management system.
    • The reader sends a wireless command to switch, signaling, bell, etc. This makes it suitable for reconstruction, where the main benefi t is the installation speed.
    • RFGCR-31 card reader is designed for reading smart cards, which are intended to enter the hotel room or any other part of the building.
    • RFGCR-31 supports RFID media with a carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1).
    • The RFGCR-31 is a design component of the system and is available in elegant black (RFGCR-31/B) and white (RFGCR-31/W) variants.
    • Input card reader is the first device of guest room management system, with which the hotel guest comes into contact first and therefore was designed with an emphasis on representative design. • Printing is possible to customize to the investor requirements. The room number as well as the logo of the hotel can be also printed on each component.
    • The controller is also equipped with touch button with function of bell and with two icons to indicate the status of guest requests, e.g. “Do Not Disturb” and “Make Up Room”.
    • Individual symbols can be illuminated in one of seven colours – red, green, blue, yellow, pink, turquoise and white.
    • Reader RFGCR-31 is equipped with an 8 A relay output with AgSnO2 contact for door lock control.
    • Reader RFGCR-31 is equipped with a sensor for ambient light intensity. Based on information from the sensor it can e.g. switch the lighting circuits in the corridor.
    • Range up to 160 m (in open space), if the signal is insuffi cient between the card reader and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
    • Communication frequency with bidirectional protocol RFIO.
    • All versions are in the size of the module (94×94 mm) from the line of luxury switches and sockets LOGUS90 and are therefore fully in line with the design of frames for the sockets of this series, where you can just as for the controllers choose white and black glass frames.
    • RFGCR-31 are designed for mounting into an installation box.

    Specification

    • Supply voltage: 110 – 230 V AC / 50 – 60 Hz
    • Dissipated power: max. 2.5 W
    • Illuminance sensor: 1 to 100 000 Lx
    • Number of control buttons: 3
    • Indication: Coloured illuminated symbol
    • Signalling: Do Not Disturb, Make Up Room
    • Output: 1x changeover 8 A / AgSnO2
    • Frequency: 866–922 MHz
    • Protection degree: IP20
    • Installation: into installation box
    • Dimensions: 94 x 94 x 36 mm
    • Weight: 161

    Downloads

    Contact Us

    • Address:
      CANADA      : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
      UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
    • Email us:
      info@dynamicpro.ca 
      info@ateis.ae
    • Call:
      Canada Office: +1 (204) 306 5173
      UAE Office: +971 (4) 3262730

     

    LEADING INNOVATION
    IN LIFE SAFETY
    DynamicPro is a Canadian company specializing in providing integrated
    technologies in life safety and advanced building management solutions.



    Our Address

    -CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

    Sun-Thurs: 8:30am - 6:30pm

    info@dynamicpro.ca / info@ateis.ae

    +1 (204) 306 5173 / +971 (4) 3262730

    Copyright 2022 © Dynamicpro