The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
The expanded selection of control modes enables it to be combined with:
a) controllers and system units DynamicPro RF Control
b) control signal 0(1) – 10 V
c) connecting to DynamicPro BUS using DAC converters.
The unit‘s 3-MODULE design with switchboard mounting enables connection of dimmed load 3 x 5 A, which represents:
a) single-color LED strip 7.2 W (ELKO Lighting) – 3 x 8 m
b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
The expanded selection of control modes enables it to be combined with:
a) controllers and system units DynamicPro RF Control
b) control signal 0(1) – 10 V
c) connecting to DynamicPro BUS using DAC converters.
The unit‘s 3-MODULE design with switchboard mounting enables connection of dimmed load 3 x 5 A, which represents:
a) single-color LED strip 7.2 W (ELKO Lighting) – 3 x 8 m
b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
6 light functions – smooth increase or decrease with time setting 2s – 30 min.
When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
The dimmer may be controlled by up to 25-channels (1-channel represents 1 button on the controller).
The power supply of the unit is in the range of 12 – 24 V DC, and is indicated by a green LED.
The package includes an internal antenna AN-I , in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
Signal range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
For components labelled as DynamicPro RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
Communication frequency with bidirectional protocol DynamicPro RF Control2 (RFIO2).
Specification
Output: 3x 5 A
Supply voltage (frequency): DC 12-24 V stabilized
Design: 3-MODULE
Dimensions: 90 x 52 x 65 mm
Protocol: RFIO2
Downloads
Contact Us
Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
LEADING INNOVATION IN LIFE SAFETY
DynamicPro is a Canadian company specializing in providing integrated
technologies in life safety and advanced building management solutions.
Our Address
-CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates