Master Panel
Imperia Edge Server IM-EDGE-1
Smart Emergency Master Panel
- Uncategorized
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
House of Worship
Products
REFERENCES » House of Worship »
Imperia Master Panel IM-6800
Product Number: IM-6800
Onboard 4G (optional 2G) DDR3 memory, 1* ud imm3
memory socket
1* VGA , 1* DVI, 1* HDMI
2* LAN, 2* USB3.0, 4* USB2.0, 2- 10* COM
2* Mini- PCIe
memory socket
1* VGA , 1* DVI, 1* HDMI
2* LAN, 2* USB3.0, 4* USB2.0, 2- 10* COM
2* Mini- PCIe
Order Inquiry
Description
IMPERIA operates without a need for permanent connection to a PC or network. The controller is designed to make use of intuitive controls, allowing simple control and change to its attached DALI networks. Reports may be viewed on the screen, displayed directly. Alternatively, the reports can be uploaded to the IMPERIA sever. IMPERIA is designed to control and monitor Class 1 DALI EXIT & Emergency Fittings ONLY. upgradeable via USB or IMPERIA server
CABLE REQUIREMENTS
IMPERIA Master Panel is designed and tested to comply with the DALI Standard EN 62386 (V0 and V1), for DALI emergency lighting components.The DALI cable connecting the luminaries in a circuit must be mains rated. 2 core cable and can be 1.0mm sq to 2.5mm sq, based on the circuit length required. The DALI cables must be of full mains rated voltage, since under certain fault conditions the DALI bus can become live at the mains voltage.
Without the use of a DALI ‘repeater & PSU’, the circuit length is limited to 300m (using 1.5mm sq cable), and this length is doubled with use of a ‘repeater & PSU’. Maximum lengths of cables permitted to be connected to the DALI network depends on the size of cable used. Refer the table given for maximum permitted length for various size of cables.
Applications
Features
- IMPERIA master panel monitors all fittinga connected to it using the DALI protocol, and monitors the following parmeters of each light fitting as well as circuit integrity of the network
- Each light fitting is given a unique address for identification
- Control circuitry with each light fittin
- Charging rate
- Discharge current of the battery
- Battery status and output terminalvoltage
- Battery capacity to ensure compliance to the rated standby time
- Checks internal resistance of the battery
- Lamp lux levels and failure monitoring
- Input supply for overvoltage andundervoltage is monitored
- Circuit integrity of the networking cables
Specification
| IMPERIA MASTER PANEL | |
| RATED VOLTAGE AND FREQUENCY: | 230V @ 50/60Hz, 6.0W |
| TEMPERATURE RANGE | 0°C to +50°C |
| WEIGHT | 873g without power supplies and controls |
| DIMENSIONS | W x H x D: 213mmx150mmx35mm (including Surface mount housing Cutout Size: 198mm x 117mm) |
| PROTECTION RATING: | IP20 – Suitable for indoor use only |
| MEMORY CAPACITY | 4 years of report Storage |
Related Products
Downloads
| IM-6800 - EL -Datasheet | (524.94 KB) |
|
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
