Products

GRMS » Wireless GRMS Range » Actuators - Wireless »


WL Actuator – 1 Channel

Product Number: WL-ACT-1-CH


  • A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
  • They can be combined with detectors, controllers, DynamicPro RF Control, or system components…
  • The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
  • It allows the connection of switched loads with a total sum of 8 A (2,000 W).
  • Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s

Order Inquiry


Description

  • A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
  • They can be combined with detectors, controllers, DynamicPro RF Control, or system components…
  • The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
  • It allows the connection of switched loads with a total sum of 8 A (2,000 W).
  • Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s-60min. It is possible to assign any function to each output relay.
  • The external button is programmed as a wireless button.
  • Each output can be controlled by up to 12/12 channels (1 channel represents 1 button on the controller).
  • The programming button on the unit is also used for manual control of the output.
  • Memory status can be pre-set in the event of a power failure.
  • For components labeled as DynamicPro RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
  • Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
  • Communication frequency with bidirectional protocol DynamicPro RF Control (RFIO2).

Specification

  • Output: 2x switching, 8 A
  • Supply voltage (frequency):  AC 230 V (50-60 Hz)
  • Design: BOX
  • Dimensions: 43 x 44 x 22 mm
  • Protocol: RFIO2

Downloads

Contact Us

  • Address:
    CANADA
    : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
  • Email us:
    info@dynamicpro.ca 
    info@ateis.ae
  • Call:
    Canada Office: +1 (204) 306 5173

    UAE Office: +971 (4) 3262730

 

LEADING INNOVATION
IN LIFE SAFETY
DynamicPro is a Canadian company specializing in providing integrated
technologies in life safety and advanced building management solutions.



Our Address

-CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
-UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

Sun-Thurs: 8:30am - 6:30pm

info@dynamicpro.ca / info@ateis.ae

+1 (204) 306 5173 / +971 (4) 3262730

Copyright 2022 © Dynamicpro