• Emergency Exit Signs - Ni-MH Battery

    Dimmers -Wireless

  • Emergency Exit Signs - LiFePO4 Battery

    Dimmers -Wireless

  • LED Self-Contained Emergency Lights

    Dimmers -Wireless


    • Products

    GRMS » Wireless GRMS Range » Dimmers -Wireless »

    WL Universal Dimming RGB Strips

    Product Number: WL-DIM-ACTR-RGB


    • The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
    • The expanded selection of control modes enables it to be combined with:
      a) controllers and system units DynamicPro RF Control
      b) control signal 0(1) – 10 V
      c) connecting to DynamicPro BUS using DAC converters.
    • The unit‘s 3-MODULE design with switchboard mounting enables connection of dimmed load 3 x 5 A, which represents:
      a) single-color LED strip 7.2 W (ELKO Lighting) – 3 x 8 m
      b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.

    Order Inquiry


    Description

    • The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
    • The expanded selection of control modes enables it to be combined with:
      a) controllers and system units DynamicPro RF Control
      b) control signal 0(1) – 10 V
      c) connecting to DynamicPro BUS using DAC converters.
    • The unit‘s 3-MODULE design with switchboard mounting enables connection of dimmed load 3 x 5 A, which represents:
      a) single-color LED strip 7.2 W (ELKO Lighting) – 3 x 8 m
      b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
    • 6 light functions – smooth increase or decrease with time setting 2s – 30 min.
    • When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
    • The dimmer may be controlled by up to 25-channels (1-channel represents 1 button on the controller).
    • The power supply of the unit is in the range of 12 – 24 V DC, and is indicated by a green LED.
    • The package includes an internal antenna AN-I , in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
    • Signal range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
    • For components labelled as DynamicPro RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
    • Communication frequency with bidirectional protocol DynamicPro RF Control2 (RFIO2).

    Specification

    • Output: 3x 5 A
    • Supply voltage (frequency): DC 12-24 V stabilized
    • Design: 3-MODULE
    • Dimensions: 90 x 52 x 65 mm
    • Protocol: RFIO2

    Downloads

    Contact Us

    • Address:
      CANADA      : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
      UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
    • Email us:
      info@dynamicpro.ca 
      info@ateis.ae
    • Call:
      Canada Office: +1 (204) 306 5173
      UAE Office: +971 (4) 3262730

     

    LEADING INNOVATION
    IN LIFE SAFETY
    DynamicPro is a Canadian company specializing in providing integrated
    technologies in life safety and advanced building management solutions.



    Our Address

    -CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

    Sun-Thurs: 8:30am - 6:30pm

    info@dynamicpro.ca / info@ateis.ae

    +1 (204) 306 5173 / +971 (4) 3262730

    Copyright 2022 © Dynamicpro