DMD3-1 is a combined detector for ceiling mounting.
Possibilities to use the DMD3-1:
– motion detector
– sensor luminescence
– temperature measuring
- humidity measurement.
The unit is equipped with two communication interfaces:
– installation DynamicPro BUS
- DALI (a maximum 4 pcs of DMD3-1 or DLS3-1 units can be used on one DALI bus).
The motion detector is used to detect people moving in the area. Using the passive scanning infrared spectrum for detection.
Integrated luminescence sensor can be used for sensing current luminescence at the point of installation of the unit. This information can be used in tasks to maintain a constant luminescence. In space where it is possible, thanks to the contribution of natural light from the outside to adjust the artificial light, which can reduce energy consumption.
Setting the communication interface is done using the SET button.
The unit can be configured via the DynamicPro Designer & Manager software, which, among other things it is possible to:
– set the desired function depending on detected motion
– resolve jobs based on the value of luminescence
– enable/disable the alarm LED on the detector housing.
DMD3-1 detector is designed for indoor installation and is not intended for outdoor use.
DMD3-1 detector is powered directly via the DynamicPro BUS installation (nominal 27 V DC) or DALI BUS (nominal 16 V DC).
DynamicPro BUS/EBM: BUS
DALI/DMX BUS: yes/no
Supply voltage: BUS 27 V DC
Rated current from BUS: 18 mA (at 27 V DC)
Housing: ceiling mounting
Dimensions: Ø 76 x 73 mm
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA. UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates