Products

GRMS » Wired GRMS Range » Converters »

Product Number: LOGIC-IN-4

Binary input units IM3-40B and IM3-80B are used for connection of 4 or 8 devices with potential-less contacts (switches, buttons, switches of other design, PIR detectors, fire and gas detectors, etc.).
Part of the inputs can be used as a balanced for alarm detectors:
– IM3-40B – inputs IN1, IN2
– IM3-80B – inputs IN1 – IN5
Contacts of external devices connected to the inputs of the unit can be NO or NC – input parameters are configured in the software iDM3.
Within the internal ESS configured in the iDM3 software, inputs must be set to balance or double balance.
The units generate a supply voltage of 12 V DC/75 mA for powering external intrusion detectors, so they can power PIR detectors, fire and gas detectors.
Active use 12 V DC output for powering detectors increases the nominal consumption of units from BUS (see technical data).
The units can be used for counting pulses of energy meters with pulse output.
The units are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories).
IM3-40B, IM3-80B in case type B are designed for mounting into a installation box.

Order Inquiry

Binary input units IM3-40B and IM3-80B are used for connection of 4 or 8 devices with potential-less contacts (switches, buttons, switches of other design, PIR detectors, fire and gas detectors, etc.).
Part of the inputs can be used as a balanced for alarm detectors:
– IM3-40B – inputs IN1, IN2
– IM3-80B – inputs IN1 – IN5
Contacts of external devices connected to the inputs of the unit can be NO or NC – input parameters are configured in the software iDM3.
Within the internal ESS configured in the iDM3 software, inputs must be set to balance or double balance.
The units generate a supply voltage of 12 V DC/75 mA for powering external intrusion detectors, so they can power PIR detectors, fire and gas detectors.
Active use 12 V DC output for powering detectors increases the nominal consumption of units from BUS (see technical data).
The units can be used for counting pulses of energy meters with pulse output.
The units are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories).
IM3-40B, IM3-80B in case type B are designed for mounting into a installation box.

Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
Email us:
info@dynamicpro.ca
info@ateis.ae
Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730