- Wired GRMS Range
Actuators
- Switching Actuator 1 Channel
- Roller Blind actuator 18-channels
- Roller Blind actuator 2-channels
Actuators
Products
GRMS » Wired GRMS Range » Actuators »
Switching Actuator 2 Channel
Product Number: SW-ACTR-2-CH
- actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of various appliances and loads by relay outputs (potentialless contacts).
- SA3-01B contains 1 relay with switching potentialless contact with
max. load 16 A/4000 VA/AC1. - SA3-02B contains 2 relays with switching potentialless contacts with
max. load 8 A/2000 VA/AC1. - Output contacts are separately controllable and addressable.
- Thanks to changeover contacts, the SA3-02B actuator can used to control a 230 V drive (such as blinds, shutters or awnings), whereas by proper bridging of contacts, it is possible to secure locking hardware options while switching on phase two outputs.
- Actuators are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories).
- LED on front panel signalizes state of each output.
- SA3 is normally supplied in the option AgSnO2 contact material.
- SA3-01B, SA3-02B are designed for mounting into the installation box.
Order Inquiry
Description
- Actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of various appliances and loads by relay outputs (potentialless contacts).
- SA3-01B contains 1 relay with switching potentialless contact with
max. load 16 A/4000 VA/AC1. - SA3-02B contains 2 relays with switching potentialless contacts with
max. load 8 A/2000 VA/AC1. - Output contacts are separately controllable and addressable.
- Thanks to changeover contacts, the SA3-02B actuator can used to control a 230 V drive (such as blinds, shutters or awnings), whereas by proper bridging of contacts, it is possible to secure locking hardware options while switching on phase two outputs.
- Actuators are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories).
- LED on front panel signalizes state of each output.
- SA3 is normally supplied in the option AgSnO2 contact material.
- SA3-01B, SA3-02B are designed for mounting into the installation box.
Specification
- Number of contacts: 2x CO, 8 A
- Switching current: 8 A / AC1
- Switching output: 2000 VA
- Supply voltage (frequency): BUS 27 V DC
- Rated current from BUS: 50 mA (at 27 V DC)
- Housing: BOX
- Dimensions: 49 x 49 x 21 mm
Related products
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
