Products
GRMS » Wireless GRMS Range » Actuators - Wireless »
WL Actuator – 1 Channel
Product Number: WL-ACT-1-CH
- A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
- They can be combined with detectors, controllers, iNELS RF Control, or system components…
- The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
- It allows the connection of switched loads with a total sum of 8 A (2,000 W).
- Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s
Order Inquiry
Description
- A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
- They can be combined with detectors, controllers, iNELS RF Control, or system components…
- The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
- It allows the connection of switched loads with a total sum of 8 A (2,000 W).
- Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s-60min. It is possible to assign any function to each output relay.
- The external button is programmed as a wireless button.
- Each output can be controlled by up to 12/12 channels (1 channel represents 1 button on the controller).
- The programming button on the unit is also used for manual control of the output.
- Memory status can be pre-set in the event of a power failure.
- For components labeled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
- Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
- Communication frequency with bidirectional protocol iNELS RF Control (RFIO2).
Specification
- Output: 2x switching, 8 A
- Supply voltage (frequency): AC 230 V (50-60 Hz)
- Design: BOX
- Dimensions: 43 x 44 x 22 mm
- Protocol: RFIO2
Downloads
| Edit Datasheet_RFSAI-61B-SL_RFSAI-62B-SL_RFSAI-11B-SL | (245.39 KB) |
|
| Declaration_of_conformity_RFSAI-61B-SL_EN | (46.76 KB) |
|
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
