• Wireless GRMS Range

    Actuators - Wireless


  • Products

    GRMS » Wireless GRMS Range » Actuators - Wireless »


    WL Actuator – 2 Channel

    Product Number: WL-ACT-2-CH


    • Switching element with one / two output relays used to control appliances and lights.  1 / 2 existing pushbuttons can be connected to the internal terminals in wiring.
    • It can be combined with Detectors, Controllers, or System Elements DynamicPro RF Control.
    • The BOX version offers installation directly into the installation box, ceiling, or housing of the controlled appliance.  Easy installation thanks to screwless terminals and zero and phase connections
    • Allows connection of switching loads with a total of 8 A (2,000 W).
    • Functions: push-button, impulse relay and delayed start-up or return time functions with 2 s-60 min time setting. Any function can be assigned to each output relay. For the RFSAI-11B-SL, the ON/OFF function can be assigned to any relay.

    Order Inquiry


    Description

    • Switching element with one / two output relays used to control appliances and lights.  1 / 2 existing pushbuttons can be connected to the internal terminals in wiring.
    • It can be combined with Detectors, Controllers, or System Elements DynamicPro RF Control.
    • The BOX version offers installation directly into the installation box, ceiling, or housing of the controlled appliance.  Easy installation thanks to screwless terminals and zero and phase connections
    • Allows connection of switching loads with a total of 8 A (2,000 W).
    • Functions: push-button, impulse relay and delayed start-up or return time functions with 2 s-60 min time setting. Any function can be assigned to each output relay. For the RFSAI-11B-SL, the ON/OFF function can be assigned to any relay.
    • The external pushbutton is assigned in the same way as the wireless pushbutton.
    • Each output can be controlled by up to 12/12 channels (1 channel represents one button on the controller). For RFSAI-61B-SL and RFSAI-11B-SL up to 25 channels.
    • The programming button on the element also serves as a manual output control.
    • Memory status can be set in case of power failure.
    • The repeater function of the elements can be set via the RFAF/USB service device.
    • Range up to 200 m (in open area), in case of insufficient signal between the controller and the element use the signal repeater RFRP-20 or elements with RFIO2 protocol that support this function.
    • Communication with DynamicPro RF Control2 bidirectional protocol (RFIO2)

    Specification

    • Output: 2x switching, 8 A
    • Supply voltage (frequency):  AC 230 V (50-60 Hz)
    • Design: BOX
    • Dimensions: 43 x 44 x 22 mm
    • Protocol: RFIO2

    Downloads

    Contact Us

    • Address:
      CANADA
      : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
      UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
    • Email us:
      info@dynamicpro.ca 
      info@ateis.ae
    • Call:
      Canada Office: +1 (204) 306 5173

      UAE Office: +971 (4) 3262730

     

    LEADING INNOVATION
    IN LIFE SAFETY
    DynamicPro is a Canadian company specializing in providing integrated
    technologies in life safety and advanced building management solutions.



    Our Address

    -CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

    Sun-Thurs: 8:30am - 6:30pm

    info@dynamicpro.ca / info@ateis.ae

    +1 (204) 306 5173 / +971 (4) 3262730

    Copyright 2022 © Dynamicpro