- Wired GRMS Range
Switches
- WL Plastic Switch – IP65
- WL Plastic Switch – 4 Button
- WL Plastic Switch – 2 Button
Switches
Products
GRMS » Wireless GRMS Range » Switches »
WL Glass Sharp Switch – 2 Button
Product Number: WL-GTS-2-S-BK / WL-GTS-2-S-WH
- The glass touch controller is a design RF (wireless) Control unit and is available in elegant black and white variants.
- Only 8 mm thick.
- RFGB-20: 2 capacitive buttons allows to control 2 devices.
- When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down). Sending a command is indicated by a red LED.
- Option of setting light scenes, where with a single press, you can control units of DynamicPro RF Control.
- The rear base allows to be attached to installation using screws, double- sided tape or keeping controller on the table.
- Battery power supply (2x 3 V/CR2032 – included in the supply) with battery life of around 2 years based on frequency of use.
- Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
- Communication frequency with bidirectional protocol RFIO.
Order Inquiry
Description
- The glass touch controller is a design RF (wireless) Control unit and is available in elegant black and white variants.
- Only 8 mm thick.
- RFGB-20: 2 capacitive buttons allows to control 2 devices.
- When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down). Sending a command is indicated by a red LED.
- Option of setting light scenes, where with a single press, you can control units of DynamicPro RF Control.
- The rear base allows to be attached to installation using screws, double- sided tape or keeping controller on the table.
- Battery power supply (2x 3 V/CR2032 – included in the supply) with battery life of around 2 years based on frequency of use.
- Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
- Communication frequency with bidirectional protocol RFIO.
Specification
- Number of channels: 2
- Power supply: 2x 3 V batteries CR 2032
- Design: glass – sharp
- Colour: B – black
- Dimensions: 94 x 94 x 8 mm
- Protocol: RFIO2
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
