• Wireless GRMS Range

    Wireless GRMS Range


  • Products

    GRMS » Wireless GRMS Range »


    WL Actuator – 1 Channel

    Product Number: WL-ACT-1-CH


    • A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
    • They can be combined with detectors, controllers, DynamicPro RF Control, or system components…
    • The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
    • It allows the connection of switched loads with a total sum of 8 A (2,000 W).
    • Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s

    Order Inquiry


    Description

    • A switching component with 2 relay outputs is used to control appliances and lights. Internal terminals can connect two existing buttons in the wiring.
    • They can be combined with detectors, controllers, DynamicPro RF Control, or system components…
    • The BOX design lets you mount it right in an installation box, a ceiling, or a controlled appliance cover.
    • It allows the connection of switched loads with a total sum of 8 A (2,000 W).
    • Function: button, impulse relay, and time function of a delayed start or return with time setting range of 2s-60min. It is possible to assign any function to each output relay.
    • The external button is programmed as a wireless button.
    • Each output can be controlled by up to 12/12 channels (1 channel represents 1 button on the controller).
    • The programming button on the unit is also used for manual control of the output.
    • Memory status can be pre-set in the event of a power failure.
    • For components labeled as DynamicPro RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
    • Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
    • Communication frequency with bidirectional protocol DynamicPro RF Control (RFIO2).

    Specification

    • Output: 2x switching, 8 A
    • Supply voltage (frequency):  AC 230 V (50-60 Hz)
    • Design: BOX
    • Dimensions: 43 x 44 x 22 mm
    • Protocol: RFIO2

    Downloads

    Contact Us

    • Address:
      CANADA
      : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
      UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
    • Email us:
      info@dynamicpro.ca 
      info@ateis.ae
    • Call:
      Canada Office: +1 (204) 306 5173

      UAE Office: +971 (4) 3262730

     

    LEADING INNOVATION
    IN LIFE SAFETY
    DynamicPro is a Canadian company specializing in providing integrated
    technologies in life safety and advanced building management solutions.



    Our Address

    -CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

    Sun-Thurs: 8:30am - 6:30pm

    info@dynamicpro.ca / info@ateis.ae

    +1 (204) 306 5173 / +971 (4) 3262730

    Copyright 2022 © Dynamicpro