- Wired GRMS Range
Wired GRMS Range
- Roller Blind actuator 2-channels
- Temperature Input 4 Channel
- Temperature Input 1 Channel
- Logic Input 8
- Logic Input 4
- Digital to Analog Converter
- Analog to Digital Converter
- Dimming Actuator for Ballasts
- Dimming actuator 6-channels
- DALI/DMX Controller for 64 Ballasts
- Dimming actuator, 2-channels
- Bus Separator for 2 Branch
- Bus Separator for 1 Branch
- Power Supply cum Bus Separator
- GRMS Main Controller
- GRMS Room Controller
- Bus Separator for 2 Branch
- Bus Separator for 1 Branch
- Power Supply cum Bus Separator
- GRMS Main Controller
- GRMS Room Controller
- Plastic Card Reader
- Internet Radio Wall Switch
- Plastic Room Thermo Regulator
- Plastic Wall Switch – 4 Buttons
- Plastic Wall Switch – 2 Buttons
- Dimming Actuator for Ballasts
- Dimming actuator 6-channels
- DALI/DMX Controller for 64 Ballasts
- Dimming actuator, 2-channels
- Glass Symbol Switch 10 Button
- Glass Symbol Switch 6 Button
- Glass Symbol Switch 4 Button
- Glass Symbol Switch 2 Button
- Temperature Input 4 Channel
- Temperature Input 1 Channel
- Logic Input 8
- Logic Input 4
- Digital to Analog Converter
- Analog to Digital Converter
- Switching Actuator 22 Channel
- Switching Actuator 12 Channel
- Switching Actuator 6 Channel
- Switching Actuator 4 Channel
- Switching Actuator 2 Channel
- Switching Actuator 1 Channel
- Roller Blind actuator 18-channels
- Roller Blind actuator 2-channels
Wired GRMS Range
Products
GRMS » Wired GRMS Range »
Roller Blind actuator 18-channels
Product Number: RSA-18-CH
- JA3-018M is an actuator designed for controlling rollers, shutters, blinds, awnings, garage doors, entrance gates, etc.
- It controls electric drives that are controlled in two directions and have a built-in limit switch.
- The unit’s status is indicated by the green RUN LED on the front panel
– if the power supply is connected, but there is no communication via BUS with master, the LED RUN is on continuously.
- if the supply voltage is connected and the unit communicates by BUS, the LED RUN flashes. - The status of the output contacts is indicated by the U/D LED:
– when the blind/roller blind is moving up/down, the corresponding LED lights up.
– if the number of switching operations per minute is exceeded, the corresponding LED fl ashes. - JA3-018M in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.
Order Inquiry
Description
- JA3-018M is an actuator designed for controlling rollers, shutters, blinds, awnings, garage doors, entrance gates, etc.
- It controls electric drives that are controlled in two directions and have a built-in limit switch.
- The unit’s status is indicated by the green RUN LED on the front panel
– if the power supply is connected, but there is no communication via BUS with master, the LED RUN is on continuously.
- if the supply voltage is connected and the unit communicates by BUS, the LED RUN flashes. - The status of the output contacts is indicated by the U/D LED:
– when the blind/roller blind is moving up/down, the corresponding LED lights up.
– if the number of switching operations per minute is exceeded, the corresponding LED fl ashes. - JA3-018M in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.
Specification
- Number of contacts: 9x CO with blocking
- Switching current: 4 A/AC15
- Switching output: 1000 VA
- Supply voltage (frequency): 100-250 V AC (50/60 Hz)
- Rated current from BUS: 5 mA (at 27 V DC)
- Housing: 6-MODULE
- Dimensions: 90 x 105 x 65 mm
Related products
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
