- Wired GRMS Range
Wireless GRMS Range
Wireless GRMS Range
- WL LAN Ethernet Gateway
- WL Touchscreen Control Unit 3.5″
- WL Glass Rounded Switch – 4 Button
- WL Glass Sharp Switch – 4 Button
- WL Glass Rounded Switch – 2 Button
- WL Glass Sharp Switch – 2 Button
- WL Plastic Switch – IP65
- WL Plastic Switch – 4 Button
- WL Plastic Switch – 2 Button
Products
GRMS » Wireless GRMS Range »
Room Controller – HVAC
Product Number: RM-CNTR-DALI
- The RC3-610M/DALI is an I/O actuator equipped with 6 binary inputs, of which 2 can be configured as temperature inputs and 8 independent relays with switching potential-free and potential contacts. It also includes two analog outputs 0(1)-10 V with a load capacity of up to 10 mA.
- Binary inputs RC3-610M/DALI are used for connecting up to 6 devices with a non-decimal contact (such as switches, switches, buttons of other designs, EZS and EPS detectors, and others).
- Temperature inputs support the connection of TC/TZ temperature sensors in a 2-wire connection for temperature sensing needs.
- The actuator is designed for switching up to eight different appliances and loads by relay output (potential-free contact).
Order Inquiry
Description
- The RC3-610M/DALI is an I/O actuator equipped with 6 binary inputs, of which 2 can be configured as temperature inputs and 8 independent relays with switching potential-free and potential contacts. It also includes two analog outputs 0(1)-10 V with a load capacity of up to 10 mA.
- Binary inputs RC3-610M/DALI are used for connecting up to 6 devices with a non-decimal contact (such as switches, switches, buttons of other designs, EZS and EPS detectors, and others).
- Temperature inputs support the connection of TC/TZ temperature sensors in a 2-wire connection for temperature sensing needs.
- The actuator is designed for switching up to eight different appliances and loads by relay output (potential-free contact).
- The maximum load capacity of the relay contacts is 10 A/2500 VA/AC1. Each of the output contacts is individually controllable. Relays are divided into four pairs, where each pair switches on its common potential.
- The DALI system BUS allows control of up to 32 independent DALI (Digital Addressable Lighting Interface) ballast addresses for fluorescent, LED, and other luminaires.
- Analog outputs are considered for use with thermoregulation heads, air-conditioning ventilation flaps, various other dimmers, or other devices with an analog control voltage of 0-10 V or 1-10 V.
- The parameters of all configurable inputs and outputs are set in the DynamicPro Designer & Manager configuration software environment, which is designed for Windows 7, 8 and 10 operating systems.
- RC3-610M/DALI in 6-MODULE version i
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
