• Wireless GRMS Range

    Wireless GRMS Range


  • Products

    GRMS » Wireless GRMS Range »


    Switching Actuator 1 Channel

    Product Number: SW-ACTR-1-CH


    •  Actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of various appliances and loads by relay outputs (potentialless contacts).
    •  SA3-01B contains 1 relay with switching potentialless contact with max. load 16 A/4000 VA/AC1.
    •  SA3-02B contains 2 relays with switching potentialless contacts with max. load 8 A/2000 VA/AC1.
    •  Output contacts are separately controllable and addressable.
    •  Thanks to changeover contacts, the SA3-02B actuator can used to control a 230 V drive (such as blinds, shutters or awnings), whereas by proper bridging of contacts, it is   possible  to secure locking hardware options while switching on phase two outputs.
    •  Actuators are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories).
    •  LED on front panel signalizes state of each output.
    •  SA3 is normally supplied in the option AgSnO2 contact material.
    •  SA3-01B, SA3-02B are designed for mounting into the installation box.

    Order Inquiry


    Description

    •  Actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of various appliances and loads by relay outputs (potentialless contacts).
    •  SA3-01B contains 1 relay with switching potentialless contact with max. load 16 A/4000 VA/AC1.
    •  SA3-02B contains 2 relays with switching potentialless contacts with max. load 8 A/2000 VA/AC1.
    •  Output contacts are separately controllable and addressable.
    •  Thanks to changeover contacts, the SA3-02B actuator can used to control a 230 V drive (such as blinds, shutters or awnings), whereas by proper bridging of contacts, it is   possible  to secure locking hardware options while switching on phase two outputs.
    •  Actuators are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories).
    •  LED on front panel signalizes state of each output.
    •  SA3 is normally supplied in the option AgSnO2 contact material.
    •  SA3-01B, SA3-02B are designed for mounting into the installation box.

    Specification

    • Number of contacts: 1x NO, 16 A
    • Switching current: 16 A / AC1
    • Switching output: 4000 VA
    • Supply voltage (frequency): BUS 27 V DC
    • Rated current from BUS: 30 mA (at 27 V DC)
    • Housing: BOX
    • Dimensions: 49 x 49 x 21 mm

    Downloads

    Contact Us

    • Address:
      CANADA
      : Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
      UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates
    • Email us:
      info@dynamicpro.ca 
      info@ateis.ae
    • Call:
      Canada Office: +1 (204) 306 5173

      UAE Office: +971 (4) 3262730

     

    LEADING INNOVATION
    IN LIFE SAFETY
    DynamicPro is a Canadian company specializing in providing integrated
    technologies in life safety and advanced building management solutions.



    Our Address

    -CANADA Address: Unit 157 - 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
    -UAE Address: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates

    Sun-Thurs: 8:30am - 6:30pm

    info@dynamicpro.ca / info@ateis.ae

    +1 (204) 306 5173 / +971 (4) 3262730

    Copyright 2022 © Dynamicpro