- Wired GRMS Range
Wired GRMS Range
- Bus Separator for 2 Branch
- Bus Separator for 1 Branch
- Power Supply cum Bus Separator
- GRMS Main Controller
- GRMS Room Controller
- Plastic Card Reader
- Internet Radio Wall Switch
- Plastic Room Thermo Regulator
- Plastic Wall Switch – 4 Buttons
- Plastic Wall Switch – 2 Buttons
- Dimming Actuator for Ballasts
- Dimming actuator 6-channels
- DALI/DMX Controller for 64 Ballasts
- Dimming actuator, 2-channels
- Glass Symbol Switch 10 Button
- Glass Symbol Switch 6 Button
- Glass Symbol Switch 4 Button
- Glass Symbol Switch 2 Button
- Temperature Input 4 Channel
- Temperature Input 1 Channel
- Logic Input 8
- Logic Input 4
- Digital to Analog Converter
- Analog to Digital Converter
- Switching Actuator 22 Channel
- Switching Actuator 12 Channel
- Switching Actuator 6 Channel
- Switching Actuator 4 Channel
- Switching Actuator 2 Channel
- Switching Actuator 1 Channel
- Roller Blind actuator 18-channels
- Roller Blind actuator 2-channels
Wired GRMS Range
Products
GRMS » Wired GRMS Range »
WL Actuator – 6 Channel
Product Number: WL-ACT-6-CH
- RFSA-66M: the switching unit with 6 output channels 8 A is used for independent control of up to 6 appliances, sockets or lights.
– the three-module design of the unit into a switchboard).
– each of the channels may be controlled by up to 25 channels.
– the package includes an internal antenna AN-I, in case of locating the element in a metal switchboard, you can use the external antenna AN-E for better signal reception - 6 function: button, impulse relay and time function of delayed start or return with time setting range of 2 s – 60 min.
- The programming button on the unit is also used for manual control of the output.
- Memory status can be pre-set in the event of a power failure
Order Inquiry
Description
- RFSA-66M: the switching unit with 6 output channels 8 A is used for independent control of up to 6 appliances, sockets or lights.
– the three-module design of the unit into a switchboard).
– each of the channels may be controlled by up to 25 channels.
– the package includes an internal antenna AN-I, in case of locating the element in a metal switchboard, you can use the external antenna AN-E for better signal reception - 6 function: button, impulse relay and time function of delayed start or return with time setting range of 2 s – 60 min.
- The programming button on the unit is also used for manual control of the output.
- Memory status can be pre-set in the event of a power failure
Specification
- Output: 3x CO / 3x NO, 8 A
- Supply voltage (frequency): AC 110-230 V (50/60 Hz), or AC/DC 12-24 V SELV
- Design: 3-MODULE
- Dimensions: 90 x 52 x 65 mm
- Protocol: RFIO2
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
