- Wired GRMS Range
Wired GRMS Range
- Bus Separator for 2 Branch
- Bus Separator for 1 Branch
- Power Supply cum Bus Separator
- GRMS Main Controller
- GRMS Room Controller
- Plastic Card Reader
- Internet Radio Wall Switch
- Plastic Room Thermo Regulator
- Plastic Wall Switch – 4 Buttons
- Plastic Wall Switch – 2 Buttons
- Dimming Actuator for Ballasts
- Dimming actuator 6-channels
- DALI/DMX Controller for 64 Ballasts
- Dimming actuator, 2-channels
- Glass Symbol Switch 10 Button
- Glass Symbol Switch 6 Button
- Glass Symbol Switch 4 Button
- Glass Symbol Switch 2 Button
- Temperature Input 4 Channel
- Temperature Input 1 Channel
- Logic Input 8
- Logic Input 4
- Digital to Analog Converter
- Analog to Digital Converter
- Switching Actuator 22 Channel
- Switching Actuator 12 Channel
- Switching Actuator 6 Channel
- Switching Actuator 4 Channel
- Switching Actuator 2 Channel
- Switching Actuator 1 Channel
- Roller Blind actuator 18-channels
- Roller Blind actuator 2-channels
Wired GRMS Range
Products
GRMS » Wired GRMS Range »
WL Analog Controller 0-10V
Product Number: WL-AL-0-10V
- The device with analog output 0(1) -10 V is used to control devices, luminaires, thermal actuators and thermal heads – which are equipped with such an input.
- They can be combined with detectors, controllers, DynamicPro RF Control or system components.
- Potential free analog output 0(1) -10 V, contact relay 16 A.
- 6 light functions – smooth increase or decrease with time setting 2 s – 30 min.
- The analog controller may be controlled by up to 25 channels.
- The programmi
Order Inquiry
Description
- The device with analog output 0(1) -10 V is used to control devices, luminaires, thermal actuators and thermal heads – which are equipped with such an input.
- They can be combined with detectors, controllers, DynamicPro RF Control or system components.
- Potential free analog output 0(1) -10 V, contact relay 16 A.
- 6 light functions – smooth increase or decrease with time setting 2 s – 30 min.
- The analog controller may be controlled by up to 25 channels.
- The programming button on the controller is also used for manual control of the output.
- Memory status can be pre-set in the event of a power failure.
- Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
- Communication frequency with bidirectional protocol RFIO2.
- The BOX design lets you mount it right in an installation box, a ceiling or light cover.
Specification
- Output: 0(1) – 10 V contact 1 VA
- Supply voltage (frequency): AC 110-230 V (50/60 Hz)
- Design: BOX
- Dimensions: 49 x 49 x 21 mm
- Protocol: RFIO2
Downloads
Contact Us
- Address:
CANADA: Unit 157 – 99 Scurfield Boulevard, Winnipeg, MB, R3Y 1Y1 , CANADA.
UAE: LIU No.11 Dubai Silicon Oasis P.O. Box 293640 Dubai United Arab Emirates - Email us:
info@dynamicpro.ca
info@ateis.ae - Call:
Canada Office: +1 (204) 306 5173
UAE Office: +971 (4) 3262730
